CVE-2024-58238
published 2025-08-09CVE-2024-58238: In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Resolve TX timeout error in power save stress test This fixes the tx…
PriorityP421medium5.5CVSS 3.1
AVLACLPRLUINSUCNINAH
EPSS
0.13%
2.8th percentile
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btnxpuart: Resolve TX timeout error in power save stress test
This fixes the tx timeout issue seen while running a stress test on
btnxpuart for couple of hours, such that the interval between two HCI
commands coincide with the power save timeout value of 2 seconds.
Test procedure using bash script:
hciconfig hci0 up
//Enable Power Save feature
hcitool -i hci0 cmd 3f 23 02 00 00
while (true)
do
hciconfig hci0 leadv
sleep 2
hciconfig hci0 noleadv
sleep 2
done
Error log, after adding few more debug prints:
Bluetooth: btnxpuart_queue_skb(): 01 0A 20 01 00
Bluetooth: hci0: Set UART break: on, status=0
Bluetooth: hci0: btnxpuart_tx_wakeup() tx_work scheduled
Bluetooth: hci0: btnxpuart_tx_work() dequeue: 01 0A 20 01 00
Can't set advertise mode on hci0: Connection timed out (110)
Bluetooth: hci0: command 0x200a tx timeout
When the power save mechanism turns on UART break, and btnxpuart_tx_work()
is scheduled simultaneously, psdata->ps_state is read as PS_STATE_AWAKE,
which prevents the psdata->work from being scheduled, which is responsible
to turn OFF UART break.
This issue is fixed by adding a ps_lock mutex around UART break on/off as
well as around ps_state read/write.
btnxpuart_tx_wakeup() will now read updated ps_state value. If ps_state is
PS_STATE_SLEEP, it will first schedule psdata->work, and then it will
reschedule itself once UART break has been turned off and ps_state is
PS_STATE_AWAKE.
Tested above script for 50,000 iterations and TX timeout error was not
observed anymore.
Affected
8 ranges
| Vendor | Product | Version range | Fixed in |
|---|---|---|---|
| debian | linux | < linux 6.9.7-1 (forky) | linux 6.9.7-1 (forky) |
| linux | linux | — | — |
| linux | linux | >= 689ca16e523278470c38832a3010645a78c544d8 < 9d5df94ce0e213d5b549633f528f96114c736190 | 9d5df94ce0e213d5b549633f528f96114c736190 |
| linux | linux | >= 689ca16e523278470c38832a3010645a78c544d8 < e4db90e4eb8d5487098712ffb1048f3fa6d25e98 | e4db90e4eb8d5487098712ffb1048f3fa6d25e98 |
| linux | linux_kernel | >= 0 < 6.9.7-1 | 6.9.7-1 |
| linux | linux_kernel | >= 0 < 6.9.7-1 | 6.9.7-1 |
| linux | linux_kernel | >= 6.4 < 6.6.49 | 6.6.49 |
| linux | linux_kernel | >= 6.7 < 6.9 | 6.9 |
CVSS provenance
nvdv3.15.5MEDIUMCVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H
osv5.5MEDIUM
vendor_debian5.5LOW
vendor_redhat5.5MEDIUM
Stop checking back — get the weekly exploitation signal.
Every Monday: what got weaponized or added to CISA KEV in the last seven days — each CVE cross-linked to its PoC, Nuclei template, and detection rule. Free, one email a week, unsubscribe in one click.
Red Hat
kernel: Bluetooth: btnxpuart: Resolve TX timeout error in power save stress test
vendor_redhat·2025-08-09·CVSS 5.5
CVE-2024-58238 [MEDIUM] kernel: Bluetooth: btnxpuart: Resolve TX timeout error in power save stress test
kernel: Bluetooth: btnxpuart: Resolve TX timeout error in power save stress test
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btnxpuart: Resolve TX timeout error in power save stress test
This fixes the tx timeout issue seen while running a stress test on
btnxpuart for couple of hours, such that the interval between two HCI
commands coincide with the power save timeout value of 2 seconds.
Test procedure using bash script:
hciconfig hci0 up
//Enable Power Save feature
hcitool -i hci0 cmd 3f 23 02 00 00
while (true)
do
hciconfig hci0 leadv
sleep 2
hciconfig hci0 noleadv
sleep 2
done
Error log, after adding few more debug prints:
Bluetooth: btnxpuart_queue_skb(): 01 0A 20 01 00
Bluetooth: hci0: Set UART break: on, status=0
Bluetooth: hci0: btnxpuart_tx_wake
Debian
CVE-2024-58238: linux - In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ...
vendor_debian·2024·CVSS 5.5
CVE-2024-58238 [MEDIUM] CVE-2024-58238: linux - In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ...
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Resolve TX timeout error in power save stress test This fixes the tx timeout issue seen while running a stress test on btnxpuart for couple of hours, such that the interval between two HCI commands coincide with the power save timeout value of 2 seconds. Test procedure using bash script: hciconfig hci0 up //Enable Power Save feature hcitool -i hci0 cmd 3f 23 02 00 00 while (true) do hciconfig hci0 leadv sleep 2 hciconfig hci0 noleadv sleep 2 done Error log, after adding few more debug prints: Bluetooth: btnxpuart_queue_skb(): 01 0A 20 01 00 Bluetooth: hci0: Set UART break: on, status=0 Bluetooth: hci0: btnxpuart_tx_wakeup() tx_work scheduled Bluetooth: hci0: btnxpuart_tx_work() dequeue: 01 0A 20 01 00
GHSA
GHSA-r4f5-ch72-xjwq: In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btnxpuart: Resolve TX timeout error in power save stress test
This fi
ghsa_unreviewed·2025-08-09
CVE-2024-58238 [MEDIUM] GHSA-r4f5-ch72-xjwq: In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btnxpuart: Resolve TX timeout error in power save stress test
This fi
In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btnxpuart: Resolve TX timeout error in power save stress test
This fixes the tx timeout issue seen while running a stress test on
btnxpuart for couple of hours, such that the interval between two HCI
commands coincide with the power save timeout value of 2 seconds.
Test procedure using bash script:
hciconfig hci0 up
//Enable Power Save feature
hcitool -i hci0 cmd 3f 23 02 00 00
while (true)
do
hciconfig hci0 leadv
sleep 2
hciconfig hci0 noleadv
sleep 2
done
Error log, after adding few more debug prints:
Bluetooth: btnxpuart_queue_skb(): 01 0A 20 01 00
Bluetooth: hci0: Set UART break: on, status=0
Bluetooth: hci0: btnxpuart_tx_wakeup() tx_work scheduled
Bluetooth: hci0: btnxpuart_tx_work() dequeue: 01 0A 20
OSV
CVE-2024-58238: In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Resolve TX timeout error in power save stress test This fixe
osv·2025-08-09·CVSS 5.5
CVE-2024-58238 [MEDIUM] CVE-2024-58238: In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Resolve TX timeout error in power save stress test This fixe
In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btnxpuart: Resolve TX timeout error in power save stress test This fixes the tx timeout issue seen while running a stress test on btnxpuart for couple of hours, such that the interval between two HCI commands coincide with the power save timeout value of 2 seconds. Test procedure using bash script: hciconfig hci0 up //Enable Power Save feature hcitool -i hci0 cmd 3f 23 02 00 00 while (true) do hciconfig hci0 leadv sleep 2 hciconfig hci0 noleadv sleep 2 done Error log, after adding few more debug prints: Bluetooth: btnxpuart_queue_skb(): 01 0A 20 01 00 Bluetooth: hci0: Set UART break: on, status=0 Bluetooth: hci0: btnxpuart_tx_wakeup() tx_work scheduled Bluetooth: hci0: btnxpuart_tx_work() dequeue: 01 0A 20 01 00
No detection rules found.
No public exploits indexed.
2025-08-09
Published